Product Finder
or
Choose one
Thickness Gauges Flaw Detectors Bond Testers Imaging Systems Scanners Transducers
Choose any (optional)
News & Events View All

NovaScope 6000

  • Class leading ultra thin spatial resolution
  • High-Resolution (0.0001in, 0.0025mm)
  • Multi-probe capability
  • Touchscreen controls
Features
ndt-icons
Single or Dual Element:
Can use both single & dual probes
alarm-mode
Alarm mode:
Alarm mode on limits
variable-units
Variable Units:
Change between mm/ inch
multiprobe
Multi-Probe:
Can use multiple probe types
data-transfer
Data Transfer:
Can be connected to PC
adjustable-velocity
Adjustable Velocity:
Velocity can be adjusted
benchtop
Benchtop:
Designed for benchtop use
adjustable-gain
Adjustable Gain:
Gain can be adjusted
thru-coating-mode
Thru Coating mode:
Can measure through coatings
hi-res
High Resolution:
Resolution to 0.0001 inches
min-max
Min/Max Mode:
Measures max and min thickness
  • 0.0001" (0.0025 mm) digital resolution; as low as 0.010" (0.254 mm) thickness resolution
  • Compatible with contact, delay line or immersion transducers
  • Dual-Trace display; A-Trace and gates
  • Displays English or Metric units
  • Velocity display (quartz-stabilized, digital)
  • Full RF or rectified RF display
  • Selectable multiple echo interval
  • Receiver attenuation control plus manual gain and Automatic Gain Control (AGC)
  • TAC (Thickness Amplitude Compensation) for noise suppression
  • Outputs: Alarms, USB, Serial RS-232C, Micro HDMI
Specifications
Dimensional Readout   English and Metric
Gaging Range English: 0.005-10 inches;
Metric 0.13-100 mm (depending upon material)
Digital Resolution English Units ± 0.0001" on 1" range
± 0.001" on 10" range
  Metric Units ± 0.001 mm on 10 mm range
± 0.01 mm on 100 mm range
Measuring Mode   Sets mode for contact, delay line or immersion transducers
Readout Mode   Selects digital display for thickness or velocity
Pulser Risetime 5 ns
  Amplitude 150, 250, 400 volts
Peak into 50 Ohms
  Repetition rate 625, 1250, 2,500, 5000 Hz
  Damping 15 to 520 Ohms - 1 Ohm increments
Receiver Adjustable gain 100 dB
  Automatic gain control 100 dB dynamic range
  Reject Variable threshold to full scale
Bandwidth Bandwidth 30 MHz (3 dB down)
Attenuator Attenuator 0, 10, and 20 dB selectable
A-Trace Display Sweep width Switchable down to 50 ns/Div
Continuously adjustable
  Sweep delay 1 ms to 80 ms
  Display Dual Trace; A-Trace plus selectable
Gate Traces (IP, IF, T or TAC)
  Display modes Full wave RF, positive or negative
Rectified
T-Gate   Thickness gate with adjustable sync
T-Gate Start/Stop   Selectable on positive or negative half cycles
IP-Gate   0.25 to 20 ms (contact), 1.0 to 0 ms (continued) (delay or immersion)
IF-Gate   0.1 to 8.0 ms
TAC-Gate   Adjustable thickness amplitude
Compensation of gain
Start control: 0.02 to 6 ms
Amplitude control: 0 to 100 dB
Slope control: 0.1 to 50 ms
Alarms   Three functions: LO, HI, LO/HI
Outputs   Alarms, Serial RS-232C, IP Sync and USB
Inputs   External sync
Power Source Power Source Battery & AC
Power Consumption   50 Watts
Warranty   One year
Screenshots
NEW FRONT
NEW SIDE ADV
NEW SIDE STD
NOVASCOPE
Rating: Not Rated Yet