OPTIMA Standard Contact transducers are rugged transducers designed for applications where rough handling is expected, where access is not limited, and/or relatively large element size and high power is needed. These units are commonly used on mill-finished wrought metals, forgings, extrusions and castings, or rough-machined materials.
Features - The heavy-duty stainless steel case and polished wear-resistant alumina protective wear plate assure long life under rough handling conditions. The exclusive positive-control "feel", even if covered with couplant. Labels are frequently color-coded and are overcoated to prevent loss of identification information. All are tuned with internal matching networks for maximum narrowbanded performance, and can be used with any commercial flaw detector. Standard contacts are especially designed for use with instruments having tuned, narrowband receivers, but also produce excellent results with instruments offering only broadbanded receivers.
Freq. MHz
Contact Rugged - Element Diameter - In
Series
0.50
0.75
1.00
1.125
0.5
General Purpose
CHRF0.54
CHRF0.56
CHRF0.58
CHRF0.59
Hi Gain
CMRF0.54
CMRF0.56
CMRF0.58
CMRF0.59
1.0
General Purpose
CHRF014
CHRFO16
CHRFO18
CHRF019
Hi Gain
CMRF014
CMRF016
CMRF018
CMRF019
2.25
General Purpose
CHRF024
CHRF026
CHRF028
CHRF029
Hi Gain
CMRF024
CMRF026
CMRF028
CMRF029
3.5
General Purpose
CHRF034
CHRF036
CHRF038
CHRF039
Hi Gain
CMRF034
CMRF036
CMRF038
CMRF039
5
General Purpose
CHRF054
CHRF056
CHRF058
-------------
Hi Gain
CMRF054
CMRFO56
CMRF058
-------------
Element Diameter
Rugged Dimentions - In
A
B
C
D
0.5
1.31
0.79
0.74
0.32
0.75
1.31
0.98
0.93
0.32
1.0
1.31
1.25
1.19
0.32
TO ORDER OPTIMA standard contact transducer, use the Model Number from the accompanying table. For a detailed description of the features of NDT Systems' GP (General Purpose), HG(High Gain), and HR (High Resolution) series transducers, see Transducer selection. Also note:
Unless otherwise specified, a side-mounted BNC connector will be provided.
Top-mounts and UHF connectors are optional and must be designed when ordering.
Documentation can be furnished for a small additional charge. See documentation and certification for details.
NDT Systems, Inc. 17811 Georgetown Lane, Huntington Beach, CA. 92647 Phone (714) -893-2438 * Fax (714) -897-3840 Contact info@ndtsystems.com with questions or comments on NDT Systems products. Contact webmaster@ndtsystems.com with questions or comments regarding this web site Copyright 2001 - 2007 NDT Systems, Inc. All rights reserved.
