NDT Systems: Ultrasonic Imaging Systems

Welcome to NDT Systems where more than our web site has changed!!




P3-12 Optional Cantelever Arm Assembly


	P3-12 Automated Pipe Scanner 4" to Flat surfaces

		NDT Systems manufactures several standard scanners for the PortaScan 007. Shown here are 2 of the most common scanners. Above is our P3-12, Pipe Scanner. It incorporates a set of powerful magnetic wheels to hold itself on a pipe of 4" diameter to flat, as well as drive itself around the pipe. The cross carriage shuttle is mounted on 4 stainless steel recirculating ball bearings. The screw drive is a zero backlash design to minimize any mechanical hysteresis. The transducer sits in the spring loaded shuttle below to assure consistent contact with the material under test. There are "In & Out" BNC connectors in the head of the scanner. This relieves any excess weight of a cable from pulling on the transducer itself, again assuring consistent coupling. An optional cantelever arm mounts to the scanner and is driven by the shuttle through the narrow end of the scanner to approach surfaces where clearance is a problem.


	All New VS1M X-Y Series Scanner




	Exclusive 'V' Track design

The new VS1M X-Y Scanner incorporates a unique rack & pinion, 'V' rail design and is driven by 2 high torque stepper motors. In this view the scanner is fitted with 3 manually operated suction cup feet (the third is hidden under the unit in the rear). This arrangement is ideal for relativly flat and smooth surfaces. Just pump the cups down and the scanner is held in almost any inclination. THese feet are interchangable with flat plate mounts or direct mount to a surface for more of a permanant test station.
THe transducer is mounted on a removable, sping loaded, dual ball bearing, dual gimbol arangement thereby allowing it to follow moderate counour changes while keeping the transducer in constant contact with the surface.
THis scanner also incorporates our "In & Out" BNC connectors on the head of the scanner. This relieves any excess weight of a cable from pulling on the transducer itself, again assuring consistent coupling.


	[Home] [Product List] [Thickness Gauges] [Flaw Detectors] [Bond Testers] [Transducers] [Imaging Systems] [Automotive] [What's NEW!!] [Reference] [Employment] [About Us]


	*NDT Systems, Inc.* 17811 Georgetown Lane, Huntington Beach, CA. 92647 Phone (714) -893-2438 * Fax (714) -897-3840 Contact info@ndtsystems.com with questions or comments on NDT Systems products. Contact webmaster@ndtsystems.com with questions or comments regarding this web site Copyright 2001 - 2007 NDT Systems, Inc. All rights reserved.