SplitView:
SplitView is Dual Timebase feature allowing the user to view the full range of the area under inspection in one window while at the same time presenting the user with a resizable second window. The second window has a separately adjustable, Range and Delay. The second window can be fixed a a specific place in time or set to automatically track (AutoTrack) an echo over a predefined level. SplitView also provides the ability to resize the top to bottom window proportion. For instance, the top window can be set to 10% of the available active display while the lower window would be 90%. SplitView can be turned off to use the entire screen for a single large waveform display.

SplitScan:
SplitScan is a operating mode allowing the user to view the active waveform while performing a Real Time B-Scan, wether timed or encoded. The feature gives the user positive feedback and identification of indications such as corrosion and pitting in real time.

AutoTrack:
AutoTrack is a feature where the second window has a separately adjustable, Range and Delay. The second window can be fixed a a specific place in time relative to the main upper window or set to Automatically Track (AutoTrack) an echo over a predefined level. While in AutoTrack, the echo being tracked will display in the center of the lower window regardless of the actual place it is in time. This features allows the user to easily view where on the echo waveform the gage is monitoring in a zoomed fashion.

Leather Case Available

SplitView Full Wave Filled

SplitView RF

SplitView RF Large
Main Window

SplitView Full Wave Hollow

RF... Full Active Area

SplitView RF Small
Main Window

SplitScan
RF and B-Scan

Display:
240 x 320 Graphic (2.3"W x 3.1"H)
Backlight - On / Off / Auto with reading Last reading hold

SplitView: (Handheld Industry First)
Main Trace Window: 100 - 10% in 10% Incr.
Split View Window: 10% - 100% in 10% Incr.
as a Function of Main Trace Window Size

SplitScan: (Handheld Industry First)
Display A-Trace and B-Scan Simultaneously

AutoTrack: (Handheld Industry First)
When in SplitView, Second Window Displays
a Zoom View of the Main A-Trace which Tracks
The Echo Being Measured

Screen Freeze Mode

Physical:
3.25" Wide X 1.4 Deep X 7" Long
All Aluminum with gasketed end caps

Range:
0.005" - 20" Total incorporating 40" Delay
Resolution - 0.0001" •Inch/mm selectable

Velocity Range:
0.0490 to .9999 in/us • fully adjustable.

Calibration: Range, Delay, Velocity & Zero

Pulser / Receiver: Up to 300Hz Rep Rate,
Unique and Adjustable IP Supression Mode

Display Mode: RF, +HW, -HW, FW

GAIN: User selectable gain 66dB with 96dB Attenuation • 500Khz - 20MHz

Probe Select: Single / Dual Element
Probe Library Selection

Damping: - 8 Damping Levels 22 - 2K Ohms

Alarm: LED Thickness High, Lo or High/Lo

I/O: RS-232 I/O: Download data from logger
Optional USB Connectivity

Memory: 2 MegaBYTE data logger. 30+ character alpha numeric identification of files. Store 20,000+ Data Points with Waveforms
& B-Scans

Operational Modes:
Single/Dual/Angle/Contact/Delay

Gates:
Contact - IP-1st, 1st-2nd Permits Through Paint
Delay/Bubbler/Immersion
IP Blocking, IF Blocking, IF-1st, 1st-2nd Echo Blk
POS or NEG Gating
DAG Optional

B-Scan Features:
'T' Scan - Time encoded 'B' Scan (Scrolling)
Encoded B-Scan

Power Requirements: Operates on 3 AA Alkalyne or NiMH Batteries • Charger & Batteries Included

Transducers, cables and accessories are
available for almost any application

Plastic carry case included

CE Approved
Manufactured in facilities meeting ISO9001
manufacturing processes